Category: Product Review, Patient Monitoring
It is the first being designed and with all parts sourced in China
Do note it is not NIHON KOHDEN Life Scope SVM-7000 series monitors but just NIHON KOHDEN SVM-7000 series monitors.
The SVM-7000 series has the following models from China
1. SVM-7501 10.4-inch monitor
2. SVM-7503 10.4-inch monitor
3. SVM-7521 12.1-inch monitor
4. SVM-7523 12.1-inch monitor
The SVM-7000 series monitors are the first being designed by a team from Shanghai Kohden with all the parts sourced entirely in China; SVM stands for "Shanghai (Kohden) Vital (Signs) Monitor". Compare the statement with that of the Vismo PVM-2700 series which are designed in Japan while the parts are sourced in China. Vismo stands for "Vital signs monitor". Before the Vismo monitors, the Life Scope BSM-2300 series monitors were designed by a team in Japan with parts sourced domestically.
The SVM-7000
series multi-parameter patient monitors are the first in the series;
this means all components, quality control and design are handled from
China. The quality of the product is of course similar to manufacturers
in China who are getting their components from the same sources as NIHON
KOHDEN.
| No Certificate of Free Sales is available from China for SVM-7000 series with invasive IBP |
|---|
Notice
there are models with Invasive IBP parameter, and these need
clinical trials in China for approval to sell in the country. The models with invasive IBP parameter are not allowed for sales in China
Thus, Certificate of Free Sales therefore cannot be provided
for all models. For some models, only Certificate for Export Sales from China are available.
 |
| Standard models from CHINA |
In order to meet distributors' need for Certificates of Free Sales, an alternative assembling site in Malaysia was selected. In
Malaysia, it seems there is no problem to get approval for domestic
sales for the models with invasive BP parameter even the models are not
yet been approved in China or Japan.
The models assembled in Malaysia are assigned a different number for the same model assembled in China.
The SVM-7000 series has the following models from Malaysia
1. SVM-7601 10.4-inch monitor
2. SVM-7603 10.4-inch monitor
3. SVM-7621 12.1-inch monitor
4. SVM-7623 12.1-inch monitor
 |
| Standard models from MALAYSIA |
There
are two types of colored frames. The standard color of the frame is white
while the models with black frame are reserved models for OEM negotiation with interested parties.
This
effectively means distributors who are successful with the standard
white frame models face the possibility of additional supply coming into
the market in the form of the black frame models as competitors.
 |
| Standard frame is the white one while versions with black frame are open for OEM negotiation |
To
bring down the cost of a product, manufacturers typically reduce the
amount of total hardware used and also saving cost by using cheaper
components which are of a lower MTBF (mean time between failures).
Contrasting against the SVM-7000 series monitors by Nihon Kohden are
products from Edan Instruments, Inc. from China whom we are aware could offer monitors with high MTBF comparable to those produced in Japan.
 |
| The types of SVM-7500 and SVM-7600 series patient monitors |
The
operation of the monitors is only by touchscreen and with two
display sizes, at 10.4 and 12.1 inches with a 800x 600 resolution.
Below table shows the details of various models from China and Malaysia respectively (including the versions with black frames); there are two models for 10.4 inch display screen and another two models for 12.1 inch display screen. According to the table there is no difference between SVM-7501 (China) and SVM-7601K (Malaysia) for example, only the assembly location.
Below table shows the details of various models from China and Malaysia respectively (including the versions with black frames); there are two models for 10.4 inch display screen and another two models for 12.1 inch display screen. According to the table there is no difference between SVM-7501 (China) and SVM-7601K (Malaysia) for example, only the assembly location.
 |
| SVM-7500 series models from CHINA and SVM-7600 series from MALAYSIA |
There is no reason to restrict assembling sites to just China and Malaysia
| How can we check if the country of origin is Japan? |
|---|
Officially,
you should know the country of origin in writing for an export; the product label is another source of information from the factory.
Below picture shows the product label for ECG-1150 ECG machine, whose production site is in China. The product label does not indicate the country of origin is Japan, since there is no specific mention of "Made in Japan". Do not mistake the corporate address as production site.
 |
| The Product Label for above ECG-1150 whose Country of Origin is China has no "Made in Japan" declaration |
In next picture,
the product label for BSM-1102 similarly has no indication "Made in Japan"
because this was a third-party product made outside of Japan. The
address just indicates ownership of the product model. In the same
picture, the lower label for Telemetry Central Monitor WEP-4208A
clearly show the product was made in Japan.
 |
| If Country of Origin is Japan, it is indicated on the product label "Made in Japan" |
| The monitors are not for sales in Japan |
|---|
There is no provision of interface for the digital telemetry networking
which is standard for a Life Scope Patient Monitor. Clearly,
this range is not sold in the Japanese domestic market and there cannot
be any Free Sales Certificate from Japan MHLW.
The SVM-7000 series monitors cannot be mixed with Life Scope or Vismo monitors in a patient monitoring network
There is strangely no brand identity for the SVM-7000 series patient monitors since it is not associated with Vismo or Life Scope brands, just the generic parent brand. Brand identities of Vismo and Life Scope are not strong any way, they are mostly just known as Nihon Kohden monitors.
However, while Vismo and Life Scope patient monitors can work together in the same real-time network (inter-bed, central monitoring), the SVM-7500/ SVM-7600 series patient monitors do not share the latest networking protocols and cannot be on the same monitoring network.
A new monitor brand is clearly needed to identify this range of patient monitors to set them apart.
However, while Vismo and Life Scope patient monitors can work together in the same real-time network (inter-bed, central monitoring), the SVM-7500/ SVM-7600 series patient monitors do not share the latest networking protocols and cannot be on the same monitoring network.
A new monitor brand is clearly needed to identify this range of patient monitors to set them apart.
We also noted the iNIBP measurement is not deployed in the SVM-7500 and SVM-7600 series.
| It is necessary to beware the mandatory need for electrical safety of monitored patients |
|---|
When networking a patient to a hardwired Ethernet network, the typical non-isolated Ethernet from NIHON KOHDEN is a danger to patient electrical safety. Network Isolation Units are mandatory to ensure safety of patient from electrical shocks.
 |
| NIHON KOHDEN network isolation transformer |
When an isolated monitor with an non-isolated Ethernet port is connected to a hardwired network, it is no longer a medical device unless the above-shown network isolation transformer is introduced between the monitor and network. If the network isolation transformer is not installed, dangerous electric shocks can be delivered to a monitored patient through the wired Ethernet network. Such dangerous electric shocks are potentially lethal and no hospital should ignore this mandatory requirement.
| WATCH OUT the dangerous use of uncertain semi-quantitative CO2 measurements and ignorantly displaying a flawed CO2 waveform |
|---|
Nihon
Kohden lacks
sidestream CO2 sampling expertise and buys OEM units to offer them as
expensive standalone. The AG-400 CO2 unit as shown, for example, is technology from Oridion Medical. For monitoring such as post-surgery recovery,
integration of
the sidestream CO2 into the monitor is a mandatory requirement because
an external unit requires additional power socket besides necessitating
the use of a trolley.
For some unknown reason, Nihon Kohden monitors have never been able to offer benefits of integrated sidestream CO2 measurements.
 |
| The inability to integrate the sidestream CO2 unit into the patient monitor main unit |
The adoption of semi-quantitative mainstream CO2 measurement was to reduce cost and its simplicity also help in miniaturization of the transducers. The first solution offered by Nihon
Kohden was the mainstream cap-ONE TG-920P CO2 sensor kit (order code P907) that can be used on non-intubated patients.
The
cap-ONE TG-920P CO2 sensor kit (order code P907) has very small sensors because semi-quantitative measurement is adopted, the method is not
commonly seen and many are not aware of the risks of obtained CO2 readings from the semi-quantitative CO2 kit sets, and to make matter worse, the semi-quantitative measurements are also being made used of to display a flawed continuous CO2 waveform.
 |
| Nihon Kohden cap-ONE P907 (TG-920P) mainstream CO2 sensor kit |
 |
| TG-921T4 semi-quantitative CO2 sensor kit for SVM-7000 series monitors |
| How to remove a relatively big disposable adapter from the two tiny transducers after use? |
|---|
 | |
| It is not easy to separate the disposable adapter from the Cap-ONE transducers after use |
When
removing disposable adapter from the mini sensors,
users tend to just pull from the cables and this action quickly weakens
the joint holding the sensors and cables. The action will
cause stress to the two joints and quickly degenerate the performance of
the transducers. This means the transducers are unlikely to last.
 |
| Users just doing the inevitable |
Shown
below is another TG-900P etCO2
kit set (order code P903) that makes semi-quantitative CO2 measurements on a traditional mainstream CO2 sensor. The TG-901T3 kit
set (order code P906) is the same thing but using a non-coded connection plug. The medical
devices from same manufacturer that make use of semi-quantitative CO2 kit
sets for patient CO2 measurements and waveform include:
- Life Scope patient monitors
- Vismo patient
monitors
- Cap-STAT OLG-2800
- CardioLife defibrillators
- Neurofax EEG
machines etc.
 |
| Nihon Kohden semi-quantitative CO2 kit sets with traditional mainstream transducer |
| Do the users know semi-quantitative CO2 measurements are only estimations? |
|---|
To
save costs, the semi-quantitative kit sets do not make measurement
during the inspiration phase. The important point is there is a measurement duty cycle and it is as shown; there is no way to know the actual CO2 measurements during the inspiration phase because CO2 measurements are not made.
 |
| Semi-quantitative means there is a duty cycle, and measurements are not continuous |
Semi-quantitative measurement is also of low-accuracy type, performed using one IR detector instead of the usual two to save cost. This is reflected in the measurement tolerance.
Contrasting, quantitative measurement delivers high accuracy for critical care. To ensure the necessary high accuracy, quantitative measurement employed two IR detectors for simultaneous CO2 measurements at different wavelength for results comparison. CO2 measurements are also being made continuously.
 |
| Quantitative measurement employs two detectors to make
continuous measurement at different wave-lengths to compare readings for high accuracy |
NIHON KOHDEN specification
for TG-901T CO2 sensor kit
shows even the specified low accuracy of CO2 measurement using semi-quantitative
method no longer holds true once CO2 is present during the inspiration
phase.
This is because actual CO2 value will be more.
| It is impossible for users to know if measurements are reliable when they cannot tell if CO2 is present during inspiration! |
|---|
 |
| Measurements are invalid when CO2 is present during inspiration, but CO2 is not measured during this period |
As seen from the duty cycle, there is no measurement being made during the inspiration phase, how does the manufacturer assure measurement accuracy? The specified measurement tolerance has no meaning for the users!
It should be clear each semi-quantitative CO2 measurement is only an estimation since its accuracy is rendered uncertain by the inability to confirm if CO2 is present during the inspiration phase.
Since the users are also not alerted on screen there is no CO2 measurement being made during the inspiration phase, they are unknowingly made to take on unnecessary risk.
| Semi-quantitative methodology means cost-effective estimations and the design cannot be used in a general way, only on a selective basis with known risks |
|---|
For example, semi-quantitative methodology can be used as a simple estimation tool for obtaining the numerical value of End-tidal Carbon Dioxide level (etCO2).
Below
picture shows the semi-quantitative method in the way it was intended
for, estimating only the etCO2 numerical value for purpose of airway tube placement confirmation. It is not for
continuous waveform display.
 |
| A hand-held semi-quantitative etCO2 estimation tool (with SpO2) for airway tube placement confirmation |
| How can you properly display a continuous CO2 waveform when your semi-quantitative measurement kits do not have the ability to make continuous measurements? |
|---|
NIHON KOHDEN also allows data from semi-quantitative measurements to be
displayed on screen with the non-measurement period reset to zero level. The insistence to display a continuous waveform using discontinuous measurement data from
semi-quantitative mainstream CO2 estimation kits is unacceptable; the
manufacturer is just subjecting the monitored patients and users to dangerous
misinterpretation risks.
A zero CO2 reading on the
waveform means zero measured value. No measurement can only mean a defective sensor, not by design!
Note the end-tidal CO2 (etCO2) value shown is also not alerted as "estimated etCO2" only.
 |
| A flawed CO2 waveform with non-measurement intervals reflected as zero measured CO2 value |
| As seen from the two true CO2 traces below, expiratory upstrokes do not always start from zero CO2 level! |
|---|
 |
| Quantitative measurements confirming expiratory upstrokes do not
always start from zero CO2 level |
Check
the latest updated table to make sure you only use quantitative method for
critical measurements and true CO2 waveform display
on screen.
 |
| Use only quantitative method for waveform display; the quantitative TG-950P (P905) shown here was already discontinued. |
| How about fully-quantitative type miniaturized mainstream CO2 sensor? |
|---|
The TG-907P CO2 Sensor kit (order code P909) shown in above table
is declared using quantitative method. This sensor was designed for
non-intubated adult CO2 monitoring, as well as neonatal CO2 monitoring. Nihon Kohden is thus offering an alternative to sidestream
CO2 sampling methodology.
 |
| The miniaturized CO2 sensor is easily broken by the bigger and stronger adapter |
The model using non-coded measurement cable for use by the SVM-7000 series monitors is shown below.
 |
| TG-971T4 quantitative CO2 sensor kit for SVM-7000 series monitors |
 |
| These are common defects of a TG-970P CO2 sensor kit (P909). The design is impractical. |
| The fragile miniaturized CO2 sensor is clearly a poor design, and easily broken |
|---|
 |
| Key point is, it does not last |
Avoid the use of Smart Cables at all costs!
It is fortunate that Smart Cables embedded with patameter codes for sharing of connector sockets are not yet found on the SVM-7000 series patient monitors.
In case you have the misunderstanding there are monitoring hardware embedded in the NIHON KOHDEN Smart Cables, we are going to show you beyond any doubt there is absolutely no active electronics in the Smart Cables.
The marketing messages "New Modular Technology" and "The Module is in the cable!" are mere imaginations.
 |
| What do the manufacturer mean by this statement? |
It started with the Life Scope TR (BSM-6000) series monitors in the USA market and gradually adopted officially for International markets. These are precise statements.
This is just assertion without showing any proof
Chip makers need huge demand to justify each of their products, so which chip manufacturer is supplying NIHON KOHDEN the variety of analog chips given the extremely low volume in demand? If we were to open up the plug of a Smart Cable, what do we see? A a small PC board is being attached to some pins of the yellow plug.
 |
| A small PC Board is soldered to some pins of the yellow connection plug |
The PC board confirms a cheap digital EEPROM chip is being used to code the Smart Cable.
 |
| A cheap digital EEPROM chip was what we found inside the yellow Smart Cable plug |
The Smart Cables are each marked with a digital hexadecimal code to identify the type of hardware needed by the measurement cable; the code is also known as the parameter code.
 |
| Overview |
The hexadecimal code in the EEPROM is inserted at the factory and not allowed to change after production. It is actually not difficult to make the Smart Cables but they are being priced highly by the manufacturer; only the common IBP cable can be sourced from China suppliers at a reasonable price.
 |
| A parameter code is stored in the plug of the measurement cable |
If we were to open up the plug of a compatible IBP cable from China suppliers, what do we see? It is the same thing, a plug with a digital code.
NIHON KOHDEN had identified five types of internal hardware that can be linked to the MULTI-parameter sockets and to make use of these hardware, a cable with the correct code must be plugged into one of the MULTI-parameter sockets. Each socket selects only one channel of the hardware, except for Temperature allowing two channels of hardware to be selected.
 |
| Principle of Operation |
One socket can select two Temperature hardware channels.
 |
| Each MULTI-parameter socket can take two channels of Temperature measurements |
Clear proof the IBP amplifier hardware is embedded inside the monitor, an important fact withdrawn from later monitor manuals |
|---|
The Life Scope BSM-2301 bedside monitor was launched before the Life Scope TR bedside monitors, and the Service Manual is clear on the design; manuals for later models stop providing such information. The major move to curb details in manuals started from Life Scope J (BSM-9101) Bedside Monitor, launched before the Life Scope TR bedside monitors.
In BSM-2301 service manual, you can see the IBP and thermistor respiration are internal hardware inside the Life Scope BSM-2301 monitor. These hardware are linked to the MULTI-parameter socket, and to make use of either hardware, a Smart Cable with the correct code must be plugged into the MULTI socket.
 |
| Can you see the IBP amplifier and thermistor respiration hardware are internal components of the Life Scope BSM-2301 monitor? |
The MULTI-parameter socket doubles as a serial port without any need for internal monitoring hardware, only as a link to the monitor. In the block diagram below, the processed digital serial data from a CO2 kit set goes straight to the digital microcontroller APU (Analog-block Processing Unit) and is forwarded to the DPU. For a parameter using the internal analog hardware, the analog signal needs to pass through an Analog-Digital converter before going to the APU for digital processing.
Using the MULTI-parameter as a serial port is only meaningful when facing the constraint of space, and is otherwise illogical.
